Steel cord rubber belt used in coal mines
Belt types
Strength:630N/m----5400N/mm
Width (mm):800mm-2400mm
Such as 800mm, 900mm, 1000mm, 1200mm, 1400mm, 1500mm,
1600mm,2000mm, 2200mm, 2400mm;
Thickness: such as 3+1.5mm, 3+2mm, 4+2mm, 5+3mm, 6+2mm, 8+2mm etc
Usage
Steel cord conveyor belts are suitable for high strength, long distance, and heavy load transportation of materials, which are widely used in coalmines, mines, ports, metallurgy, electricity, chemical industries, etc.
Characteristics
1. High tensile strength: The belts are suitable for large span, long distance transportation of materials.
2. Small elongation in use: The belts need only a very short take-up stroke distance.
3. Small diameter of drive pulley: The carcass has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.
4. High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in service life.
5. Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run deviation.
6. Good troughability: As the carcass has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.
7. Good troughability: As the belt body has no transverse skeleton, it is easy to from a deep trough, so the belts can load more materials and prevent the materials from escaping.
8. Inspection of the belt with X-rays: Users can take X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
Standard Specifications
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Features: high tensile strength, low extensibility, small used transmission pulley diameter, uniform steel wire rope
tension, excellent troughbility and good adhesive between rubber and steel wire.
Applicable environment: The belt realizes conveying a large amount of materials at long distance and at high speed in the fields of coal, mine, ports, metallurgy, electric power, chemical engineering, etc.
Technical data: The steel cord conveying belt has the general used, high abrasion, cold-resistant and flame-retardant according to the using requirement and the performance of the cover rubber.
| Item |
ST630 |
ST800 |
ST1000 |
ST1250 |
ST1600 |
ST2000 |
ST2500 |
ST3150 |
ST3500 |
ST4000 |
ST4500 |
ST5000 |
ST5400 |
| Tensile strength(N/mm) |
630 |
800 |
1000 |
1250 |
1600 |
2000 |
2500 |
3150 |
3500 |
4000 |
4500 |
5000 |
5400 |
| Diameter(mm) |
3 |
3.5 |
4.0 |
4.5 |
5.0 |
6.0 |
7.2 |
8.1 |
8.6 |
8.9 |
9.7 |
10.9 |
11.3 |
| pitch(mm) |
10±1.5 |
10±1.5 |
12±1.5 |
12±1.5 |
12±1.5 |
12±1.5 |
15±1.5 |
15±1.5 |
15±1.5 |
15±1.5 |
16±1.5 |
17±1.5 |
17±1.5 |
| Top cover thickness(mm) |
5 |
5 |
6 |
6 |
6 |
8 |
8 |
8 |
8 |
8 |
8 |
8.5 |
9 |
| Bottom cover thickness(mm) |
5 |
5 |
6 |
6 |
6 |
8 |
8 |
8 |
8 |
8 |
8 |
8.5 |
9 |
| Width (mm) |
Number of steel cord |
| ST630 |
ST800 |
ST1000 |
ST1250 |
ST1600 |
ST2000 |
ST2500 |
ST3150 |
ST3500 |
ST4000 |
ST4500 |
ST5000 |
ST5400 |
| 800 |
75 |
75 |
63 |
63 |
63 |
63 |
50 |
50 |
50 |
|
|
|
|
| 1000 |
95 |
95 |
79 |
79 |
79 |
79 |
64 |
64 |
64 |
64 |
59 |
55 |
55 |
| 1200 |
113 |
113 |
94 |
94 |
94 |
94 |
76 |
76 |
77 |
77 |
71 |
66 |
66 |
| 1400 |
133 |
133 |
111 |
111 |
111 |
111 |
89 |
89 |
90 |
90 |
84 |
78 |
78 |
| 1600 |
151 |
151 |
126 |
126 |
126 |
126 |
101 |
101 |
104 |
104 |
96 |
90 |
90 |
| 1800 |
|
171 |
143 |
143 |
143 |
143 |
114 |
114 |
117 |
117 |
109 |
102 |
102 |
| 2000 |
|
|
159 |
159 |
159 |
159 |
128 |
128 |
130 |
130 |
121 |
113 |
113 |
| 2200 |
|
|
|
|
|
176 |
141 |
141 |
144 |
144 |
134 |
125 |
125 |
| 2400 |
|
|
|
|
|
193 |
155 |
155 |
157 |
157 |
146 |
137 |
137 |
Note: 1. Thickness of cover rubber, Diameter of steel cord and pitch of steel cord can be customized according to the requirement of the customer after negotiation.
2. The belt can be produced according to the requirement of the customer under the standards of the German DIN22131, Australia AS133, Japan JISK6369, etc |
Performance of the cover rubber
| Item |
perfomance |
| H |
D |
L |
| Tensile strength |
MPa≥ |
24.0 |
18.0 |
15.0 |
| Elongation at break |
%≥ |
450 |
400 |
350 |
| abrasion |
Mm3≤ |
120 |
90 |
200 |
Adhesive
| strength |
Adhesive of Steel cord |
strength |
Adhesive of steel cord |
| Before aging |
After aging |
Before aging |
After aging |
| ST630 |
60 |
55 |
ST3150 |
140 |
130 |
| ST800 |
70 |
65 |
ST3500 |
145 |
140 |
| ST1000 |
80 |
75 |
ST4000 |
150 |
145 |
| ST1250 |
95 |
90 |
ST4500 |
165 |
160 |
| ST1600 |
105 |
95 |
ST5000 |
175 |
170 |
| ST2000 |
105 |
95 |
ST5400 |
180 |
175 |
| ST2500 |
130 |
120 |
|
|
|
Minimum Pulley Diameter
| Item |
ST630 |
ST800 |
ST1000 |
ST1250 |
ST1600 |
ST2000 |
ST2500 |
ST3150 |
ST3500 |
ST4000 |
ST4500 |
ST5000 |
ST5400 |
| Minimum pulley diameter (mm) |
500 |
500 |
630 |
800 |
1000 |
1000 |
1250 |
1400 |
1600 |
1600 |
1600 |
1800 |
1800 |
TECHNICAL INDEXES
Other rubber belt types
Fire Resistant Belts
Chemical Resistant Conveyor Belts
Cold Resistant Belts
Heat resistant belt
Sidewall Belting
Bucket Elevator
Chevron Conveyor Belts
Rough Top Conveyor Belts
Fabricated Conveyor Belts
Steel Cord Conveyor Belts
Pipe Conveyor Belts
Certificate:
FAQ:
(1)Q: Are you a factory or trading company
A: We are factory with export license. We have the most convenient transportation conditions.
(2)Q: Do you offer samples?
A: We are glad to offer you free samples. New clients are expected to pay for the delivery cost,this charge will be deducted from the payment for formal order.
(3)Q: How about the lead time?
A: Within10-20 days after getting the prepayment or L/C.
(4)Q: How can we pay?
A: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T or L/C at sight for large amount of the order.
(5)Q: Can you do CO, Form E, Form F, Form A etc?
A: Yes, we can do them for you.
Welcome to visit our web: qdbothwin.en.made-in-china.com for more conveyor belt and rubber sheet information.
){kind=link}